The Performance Air Cleaner Extraction Fan takes in air laden with spray mist and overspray and returns clean air to your workspace.
Typical application is to place near your workspace or if using a tanning tent, unzip and secure the tent overspray flap and place behind the tent. Place the fan so that the filter side is closest to you and so the fan blows air away from your work area.
An air filter is included with the fan.
Features:
- Three Speeds - Max, Normal, & Low Filtration Volumes.
- Any standard 20"x20"x1" furnace replacement filter may be used. But we recommend that when replacing the filter that you consider replacement filters with a MERV rating of at least 8. The higher the MERV number the better the filter is at removing smaller particles. For even better results consider a filter with a MERV rating of 11.
-
Clean the Air in a Large Room* in Less Than 5 Minutes!
- Unfiltered Air In, Clean Air Out
- U.L. Listed
*Based on a 15'x15'x8' room
Filter Installation:
Remove any packaging on the filter. The filter holder is secured by two snapping clips. The filter is secured inside the filter holder by two rotating clips. Place the filter inside the filter holder so that the arrow on the side of the filter points in the direction of air flow -- toward the front of the fan.
Filter Guide
| MERV Rating * | Particle Size | Example Contaminant |
| 1 to 4 | 10.0 microns | pollen, dust mites, coarse dust |
| 5 to 8 | 3.0 to 10 microns | mold spores, hair spray |
| 9 to 12 | 1.0 to 3.0 microns | fine dust and fumes |
| 13 to 16 | .30 to 1.0 microns | bacteria, tobacco smoke, sneeze |
| 17 to 20 | <= .30 microns | combustion smoke, unattached virus |
* MERV - Minimum Efficiency Reporting value
For more information on MERV and ventilation, see the link below.
Spray Tanning Ventilation Requirements
Dimensions: 21" square